Miata stuff nobody wants

Feeling generous?
Post Reply
david.valeri
Posts: 393
Joined: Mon Oct 01, 2007 8:11 am
Car: 1994 Mazda Miata
CDC Member#: 22
Location: VA

Miata stuff nobody wants

Post by david.valeri »

This stuff goes to the dump on Thursday. Come and get it.

Miata Fuel Rail Adapter for -6AN Fitting - Generic EBay/Internet fuel rail adapter for connecting a -6AN connector to the stock Miata fuel rail. Already modified to fit the Miata rail as shown in the pictures. Includes bolts to mount it to the rail.
Image
Image

NA Miata AC Condenser Mounts - Bolts, spacers, and rubber isolators for the AC condenser.
Image

94 Miata 4-wire 02 Sensor - I bought this just to get the OE connector to wire in a wide band 02 sensor to the factory wiring harness. Consequently, the OE connector has been cut off. If you need to replace your 02 sensor, cut your existing sensor off the connector and solder this one on.
Image

Miata Fuel Rail Adapter for 5/16 Hose Barb - NRG or similar generic brand adapter. I already took the grinder to it to make the plate fit the Miata rail as can be seen in the photos. Includes the washers and longer bolts needed to make it fit properly. It worked for me on a track car with standard high pressure injector hose and a screw type hose clamp.
Image
Image

NA 94-97 Fuel Pressure Regulator
Image

NA (94) OE Fuel Pump and Strainer
Image

1.8L NA (94-97) OE Exhaust Manifold and Down Pipe
Image
Image

99-00 Intake Cam
Image
Image

94-97 Clutch Hard Line
Image

94-97 Rotor Dust Shields
Image

NA 1994 Miata AC Condenser Fan - Used. Includes hardware.
Image

NB Miata Dipstick Tube - I think it is for an NB with California emissions.
Image

NA 1994 AC Hard-lines and Pressure Sensor, AC Compressor Mount,
Image
Image
Post Reply