Miata Fuel Rail Adapter for -6AN Fitting - Generic EBay/Internet fuel rail adapter for connecting a -6AN connector to the stock Miata fuel rail. Already modified to fit the Miata rail as shown in the pictures. Includes bolts to mount it to the rail.
![Image](https://lh3.googleusercontent.com/-R4Yp-TRM9-Q/UizkWLVeSvI/AAAAAAAACH8/PY62KIwoyCw/s400/IMG_20130908_152132.jpg)
![Image](https://lh6.googleusercontent.com/-OGh5gugdYzQ/UizkUlfzbjI/AAAAAAAACH0/wNhwhF7llUo/s400/IMG_20130908_152100.jpg)
NA Miata AC Condenser Mounts - Bolts, spacers, and rubber isolators for the AC condenser.
![Image](https://lh3.googleusercontent.com/-vsiO62bO5Yk/UizkTvqUjyI/AAAAAAAACHs/JalngvLFtFU/s400/IMG_20130908_153114.jpg)
94 Miata 4-wire 02 Sensor - I bought this just to get the OE connector to wire in a wide band 02 sensor to the factory wiring harness. Consequently, the OE connector has been cut off. If you need to replace your 02 sensor, cut your existing sensor off the connector and solder this one on.
![Image](https://lh6.googleusercontent.com/-yV2_2XNGId0/UizkPogPO7I/AAAAAAAACHU/r9ZU0X71g-A/s400/IMG_20130908_154000.jpg)
Miata Fuel Rail Adapter for 5/16 Hose Barb - NRG or similar generic brand adapter. I already took the grinder to it to make the plate fit the Miata rail as can be seen in the photos. Includes the washers and longer bolts needed to make it fit properly. It worked for me on a track car with standard high pressure injector hose and a screw type hose clamp.
![Image](https://lh6.googleusercontent.com/-GQwEweX12yk/UizkNJDNcdI/AAAAAAAACHE/UFOAAemHi8M/s400/IMG_20130908_151842.jpg)
![Image](https://lh5.googleusercontent.com/-s1bMtYcDXVE/Uizj0U23LwI/AAAAAAAACFQ/j-qelerRIJo/s400/IMG_20130908_151911.jpg)
NA 94-97 Fuel Pressure Regulator
![Image](https://lh5.googleusercontent.com/-Zp-s0Wm5kc8/Uizj94PBW7I/AAAAAAAACGE/0UMD-7dYToo/s400/IMG_20130908_152213.jpg)
NA (94) OE Fuel Pump and Strainer
![Image](https://lh6.googleusercontent.com/-7WZxvtCX-Vk/Uizj2Ne1HMI/AAAAAAAACFY/IuoqRDyAVLI/s400/IMG_20130908_150858.jpg)
1.8L NA (94-97) OE Exhaust Manifold and Down Pipe
![Image](https://lh6.googleusercontent.com/-cUJBaf0wvtk/UizjvRB0w5I/AAAAAAAACEw/GyloXrE9-J4/s400/IMG_20130908_155047.jpg)
![Image](https://lh3.googleusercontent.com/-twOiudyoKdw/Uizj-6vvpdI/AAAAAAAACGM/yPpZz0gXV7w/s400/IMG_20130908_155104.jpg)
99-00 Intake Cam
![Image](https://lh4.googleusercontent.com/-QIqJFq9xVao/UQFuiOzuDcI/AAAAAAAABQg/BGoKQ1FF6kA/s400/IMG_20130124_121803.jpg)
![Image](https://lh3.googleusercontent.com/-u8oeJxqhABE/UQFuiARx2sI/AAAAAAAABQc/Drvj5yZANJE/s400/IMG_20130124_121751.jpg)
94-97 Clutch Hard Line
![Image](https://lh3.googleusercontent.com/--nM-oO7hNUA/UipsjxkZEfI/AAAAAAAAB9A/RWmP-I7-ClI/s400/IMG_20130906_190921.jpg)
94-97 Rotor Dust Shields
![Image](https://lh3.googleusercontent.com/-tnQFO-x1VPM/UipsozLVnlI/AAAAAAAAB9o/VyiPoz7UWhc/s400/IMG_20130906_194143.jpg)
NA 1994 Miata AC Condenser Fan - Used. Includes hardware.
NB Miata Dipstick Tube - I think it is for an NB with California emissions.
![Image](https://lh4.googleusercontent.com/-4Nlyd5yXcM4/UN5W4L69C5I/AAAAAAAABKU/GWaMwtkhRWo/s640/IMG_20121228_211124.jpg)
NA 1994 AC Hard-lines and Pressure Sensor, AC Compressor Mount,