1994 1.8L Miata Engine w/ ~120K Miles

[david.valeri]

Strong 1994 motor w/ factory 1.8 flywheel and clutch. Timing belt, tensioner and idler pulley, cam seals, plugs done less than 10K miles ago. Unknown age on the water pump. Needs a new rear main seal as it does drip some oil through the weep hole in the transmission. While it is out I would do the front main seal and maybe the oil pan as well while they are easy to get to. I'd say good oil consumption for its age. Nothing that I was concerned about.

There is also a mint condition engine stand available.

Does not include coils, plug wires, transmission bolts, and front or rear coolant covers. The throttle body, IAC, and TPS will come with for the right price.

It made 106 WHP on Ed York's dyno w/ bolt ons and the stock ECU. Ed's dyno is a heartbreaker [1][2] so add about 10% to that to get an idea of what it would read on a Dyno Jet. I have dyno sheets if you are interested.

Make me an offer.

[1] - http://forum.specmiata.com/cgi-bin/ulti ... 000786;p=0
[2] - http://www.miataturbo.net/general-miata ... trq-65095/

[david.valeri]

Sold.